64-65 Lincoln Convertible Rear Door Window Leading Edge Seal,

[NorCal Mike]

64-65 Lincoln Convertible Rear Door Window
Leading Edge Seal, How do these install? Do you just slide the old one out and slide the new one in?

[Dan Szwarc]

The old seal may be glued in. Save the upper tip unless the new seal comes with one.

There’s a screw at the bottom holding the seal in the track. Open the rear door, close the latch with a screwdriver and the window will go up.

Remove the old seal, slide in the new one as a dry fit, glue as needed.

To lower the window, push the outside button or pull the inside handle as if you are opening the door. Window should auto-drop.

Don’t slam the door without popping the latch using the door button.

[NorCal Mike]

Thanks Dan !!