Convertible top out of sequence

Anything that pertains only to a convertible goes here. Such as: Top material, pads, mechanism, hydraulic pumps, switch and relay mechanisms, latches, etc.

Moderators: Dan Szwarc, jleonard

Post Reply
kellertb
Newbie
Posts: 2
Joined: Fri Dec 21, 2018 11:27 pm
Contact:

Convertible top out of sequence

Post by kellertb »

My 66 continental convertible top is out of sequence. When I hit the top down switch, the top begins to go down before the deck unlocks. In addition, during the top up cycle, I have to pull the back window forward on the driver side in order to get the lever to move in front of the pin so the top hits the header evenly. Anybody have any ideas?
kellertb
Newbie
Posts: 2
Joined: Fri Dec 21, 2018 11:27 pm
Contact:

Re: Convertible top out of sequence

Post by kellertb »

A rebuilt upper back panel switch fixed the out of sequence issue. Still wrestling with finger behind the pin issue on the drivers side
defrang
Addicted to Lincolns
Posts: 1027
Joined: Tue Jul 16, 2013 6:21 pm
Location: Lake Stevens, WA
Contact:

Re: Convertible top out of sequence

Post by defrang »

Call John Brewer at (303) 562-8368‬. Or John Cashman. They can easily sort out any top problem in a 60s Lincoln.
Robert DeFrang
Post Reply

Return to “Convertibles, Convertibles, Convertibles”

Who is online

Users browsing this forum: No registered users and 1 guest