My 64 Project. Phase 2: Air Ride.
Moderators: Dan Szwarc, jleonard
-
- Addicted to Lincolns
- Posts: 1027
- Joined: Tue Jul 16, 2013 6:21 pm
- Location: Lake Stevens, WA
- Contact:
Re: My 64 Project. Phase 2: Air Ride.
Pat,
is there any welding required or is this bolt on?
Rob
is there any welding required or is this bolt on?
Rob
Robert DeFrang
- burnski
- Dedicated Enthusiast
- Posts: 987
- Joined: Mon Nov 09, 2015 3:18 pm
- Location: Sarnia, Ontario, Canada
- Contact:
Re: My 64 Project. Phase 2: Air Ride.
Bit of welding. You have to weld tabs to the axle, and weld plates into the lower control arms. No actual welding to the car. That's it for welding.
technically if you wanted to go back to stock you would cut the tabs off the axle and replace the control arms.
technically if you wanted to go back to stock you would cut the tabs off the axle and replace the control arms.
-
- Addicted to Lincolns
- Posts: 1151
- Joined: Sun Jun 28, 2009 12:33 pm
- Location: Lutz, FL
- Contact:
Re: My 64 Project. Phase 2: Air Ride.
Looking great man. It is a great kit!
Jason "ODB" Ballard
Instagram:
@bd94s10 https://www.instagram.com/bd94s10/
@OurLifestylePodcast https://www.instagram.com/ourlifestylepodcast/
@LincolnAddict https://www.instagram.com/lincolnaddict/
#ProjectSmugglersBlues https://www.instagram.com/explore/tags/ ... lersblues/
Instagram:
@bd94s10 https://www.instagram.com/bd94s10/
@OurLifestylePodcast https://www.instagram.com/ourlifestylepodcast/
@LincolnAddict https://www.instagram.com/lincolnaddict/
#ProjectSmugglersBlues https://www.instagram.com/explore/tags/ ... lersblues/
-
- Occasional Visitor
- Posts: 45
- Joined: Wed Feb 19, 2014 3:49 pm
- Location: Livermore, CA
- Contact:
Re: My 64 Project. Phase 2: Air Ride.
Sweeeeeet!! Lookin good! When we installed my kit we put bigger tabs on the upper links you weld to the rear end. The ones with the kit seemed really small.
I also had my passenger side front bag blow out a coupe weeks back because it was rubbing the rear of the spring pocket. I cut out the back of the spring pocket on both sides for clearance. Its a tight fit. My buddy that helped me couldn't believe it. He's done hundreds of air bag installs.
I also had my passenger side front bag blow out a coupe weeks back because it was rubbing the rear of the spring pocket. I cut out the back of the spring pocket on both sides for clearance. Its a tight fit. My buddy that helped me couldn't believe it. He's done hundreds of air bag installs.
- burnski
- Dedicated Enthusiast
- Posts: 987
- Joined: Mon Nov 09, 2015 3:18 pm
- Location: Sarnia, Ontario, Canada
- Contact:
Re: My 64 Project. Phase 2: Air Ride.
i was kinda thinking the upper tabs were pretty dinky, but then again they really only serve to align the axle / prevent wrapping.lowlifelinc wrote:Sweeeeeet!! Lookin good! When we installed my kit we put bigger tabs on the upper links you weld to the rear end. The ones with the kit seemed really small.
I also had my passenger side front bag blow out a coupe weeks back because it was rubbing the rear of the spring pocket. I cut out the back of the spring pocket on both sides for clearance. Its a tight fit. My buddy that helped me couldn't believe it. He's done hundreds of air bag installs.
yes, i did hear about spring pocket clearance issues - i will deffinately be aware of that when i install the fronts
![Smile :)](./images/smilies/icon/smile.gif)
- burnski
- Dedicated Enthusiast
- Posts: 987
- Joined: Mon Nov 09, 2015 3:18 pm
- Location: Sarnia, Ontario, Canada
- Contact:
Re: My 64 Project. Phase 2: Air Ride.
Trunk install 90% done. Just missing a couple push-to-connect fittings, air filter & fuse box from eBay then I can finally fire up the system. Still gotta finish the 4 link and the front end but I'm fighting a cold though so might be a couple more weeks.
- burnski
- Dedicated Enthusiast
- Posts: 987
- Joined: Mon Nov 09, 2015 3:18 pm
- Location: Sarnia, Ontario, Canada
- Contact:
Re: My 64 Project. Phase 2: Air Ride.
progress. My buddy came over and welded on the 4-link tabs:
And i got it all painted, and installed. Here is the first test run: https://youtu.be/i5OJJMu6cGw
Note the axle is up on jack stands so its sitting really high.
And i got it all painted, and installed. Here is the first test run: https://youtu.be/i5OJJMu6cGw
Note the axle is up on jack stands so its sitting really high.
-
- Addicted to Lincolns
- Posts: 1027
- Joined: Tue Jul 16, 2013 6:21 pm
- Location: Lake Stevens, WA
- Contact:
Re: My 64 Project. Phase 2: Air Ride.
They look like nice welds. No amateur. The video is good. You're going to have a lot of fun with this car.
Robert DeFrang
- burnski
- Dedicated Enthusiast
- Posts: 987
- Joined: Mon Nov 09, 2015 3:18 pm
- Location: Sarnia, Ontario, Canada
- Contact:
Re: My 64 Project. Phase 2: Air Ride.
Lol thanks. He's a weld inspector on train cars so I hope he knows what he's doing loldefrang wrote:They look like nice welds. No amateur. The video is good. You're going to have a lot of fun with this car.
- burnski
- Dedicated Enthusiast
- Posts: 987
- Joined: Mon Nov 09, 2015 3:18 pm
- Location: Sarnia, Ontario, Canada
- Contact:
Re: My 64 Project. Phase 2: Air Ride.
Heres some install pics of the 4-link:
-
- Addicted to Lincolns
- Posts: 1151
- Joined: Sun Jun 28, 2009 12:33 pm
- Location: Lutz, FL
- Contact:
Re: My 64 Project. Phase 2: Air Ride.
Looking real good!
Jason "ODB" Ballard
Instagram:
@bd94s10 https://www.instagram.com/bd94s10/
@OurLifestylePodcast https://www.instagram.com/ourlifestylepodcast/
@LincolnAddict https://www.instagram.com/lincolnaddict/
#ProjectSmugglersBlues https://www.instagram.com/explore/tags/ ... lersblues/
Instagram:
@bd94s10 https://www.instagram.com/bd94s10/
@OurLifestylePodcast https://www.instagram.com/ourlifestylepodcast/
@LincolnAddict https://www.instagram.com/lincolnaddict/
#ProjectSmugglersBlues https://www.instagram.com/explore/tags/ ... lersblues/
- burnski
- Dedicated Enthusiast
- Posts: 987
- Joined: Mon Nov 09, 2015 3:18 pm
- Location: Sarnia, Ontario, Canada
- Contact:
Re: My 64 Project. Phase 2: Air Ride.
thanks man. little update from last night. I got my ride-height set, my pinion angle set, and locked down all of the 4-link bars. Then I dropped it down and started trimming the driveshaft tunnel:
it can still go lower, but I broke every jigsaw blade I own but here is how she sits now:
it can still go lower, but I broke every jigsaw blade I own but here is how she sits now:
- burnski
- Dedicated Enthusiast
- Posts: 987
- Joined: Mon Nov 09, 2015 3:18 pm
- Location: Sarnia, Ontario, Canada
- Contact:
Re: My 64 Project. Phase 2: Air Ride.
Mufflers are back on. Also installed the shocks, bump stops, and hooked up the ride height sensors.
I also trimmed the tunnel back a bit more
I also tracked down my air leak, will see tomorrow if it's still holding pressure. I also remade a brake line but the wife wasn't around tonight so hopefully I'll bleed it tomorrow. Then I can finally turn the car around and start on the front. I still have a ton of stuff to do on the rear but it can wait until after the front is done.
I also trimmed the tunnel back a bit more
I also tracked down my air leak, will see tomorrow if it's still holding pressure. I also remade a brake line but the wife wasn't around tonight so hopefully I'll bleed it tomorrow. Then I can finally turn the car around and start on the front. I still have a ton of stuff to do on the rear but it can wait until after the front is done.
- burnski
- Dedicated Enthusiast
- Posts: 987
- Joined: Mon Nov 09, 2015 3:18 pm
- Location: Sarnia, Ontario, Canada
- Contact:
Re: My 64 Project. Phase 2: Air Ride.
Progress report. Got the front stripped, strut rod bushings replaced with energy polyurethane, and lower control arms stripped, cleaned, ready to weld in the lower bag plates.
- burnski
- Dedicated Enthusiast
- Posts: 987
- Joined: Mon Nov 09, 2015 3:18 pm
- Location: Sarnia, Ontario, Canada
- Contact:
Re: My 64 Project. Phase 2: Air Ride.
Got the lower plates welded in yesterday. And have it pretty much installed today. Still need to finish routing the hoses and mount the front e-level sensors. Then just clean up the trunk and build a new trans tunnel.
Who is online
Users browsing this forum: No registered users and 0 guests