'64Deck lid tries to close as top is coming down please help

Anything that pertains only to a convertible goes here. Such as: Top material, pads, mechanism, hydraulic pumps, switch and relay mechanisms, latches, etc.

Moderators: Dan Szwarc, jleonard

Post Reply
myamin
Newbie
Posts: 4
Joined: Mon Jul 03, 2006 8:08 pm
Contact:

'64Deck lid tries to close as top is coming down please help

Post by myamin »

My top wouldn't come down but once I added ATF to the pump it started to come down but the deck lid tried to shut simultaneously. Does anyone have a clue?

Sincerly
Mike
1964 LC Blk/blk
John T
Occasional Visitor
Posts: 44
Joined: Mon Feb 26, 2001 1:01 am
Location: Danvers, MA USA
Contact:

Post by John T »

oMike: The early cars with the single pump and solenoids can be interesting to get operting properly. You have air in the lines and cylinders that is actually pushing the deck lid down while the top is trying to move. Make something to hold the deck lid in the open position. Disconnect the cylinders from the deck lid and body without removing any hydraulic lines. Cycle the cylinders while in the as mounted position to expel the air from the top half. Turn the cylinders upside down and repeat the process. This will allow the trapped air to come to the top of the cylinder and be transfered to the pump where it ends up in the top of the pump. The sound of the pump should be more consistent as it pumps only fluid and not a combination of fluid and air.

Have fun

John T.
Post Reply

Return to “Convertibles, Convertibles, Convertibles”

Who is online

Users browsing this forum: No registered users and 1 guest