TheLincolnForum.Net

Justin, I have a couple of these in stock and I've used John (Damper Doctor) in the past. He does excellent work. His turnaround is sometime long b/c he doesn't have many cores at hand. I can look today and see if I have the 61-62 version or the 63-68 version in stock. Let me know if you're interest...

Moses, I have a re-cored radiator for the 1961 Lincoln Continental with the transmission cooler lines on the right. I also have a recored radiator for the 1961 Lincoln Continental withe BOTH the transmission cooler and power steering cooler lines (right and left, respectively). These are new 3 row, ...

Dont' hold me to this Nick but it looks rebuildable. The bearing and shaft don't look scored or burnt. the pressure plate looks smooth and undamaged also.

Alex

Not sure this is pertinent any more but I carry rebuilt gear boxes and power steering pumps. I have the 61/62 variety, the 63/64 variety and the 65-69 variety. I also carry rebuilt power steering pumps. Gear boxes are $295 for 61-64 and $250 for 65-69. Power steering pumps are $275 with core exchang...

I've got rebuilt carter 3 port fuel pumps in stock if you still need one Washmaster.

Alex

rebuilt water pumps $135 plus ship. Minimum 90 day warranty.

Alex
562.682.2042

I have rebuilt power steering pumps in stock gents. let me know if you want to go that rout cgallaway. 562.682.2042 (m)

Alex

Hey Dean, I have a good gas tank for 64/65. Message me if you're still in search of one. 562.682.2042 is my mobile number.


Alex

Thanks for the mention DavidPeden

Anyone use the CPP master cylinder & proportioning valve combo? Could save me an afternoon or more of flaring lines and bending brake tube if I go that route. My booster was replaced by the previous owner so I don't want to replace that, but concerned about fit between the aftermarket MC and OG...

I put together this hydraulic brake assist kit for the lincolns. Works very well, 3x the pressure compared to vacuum assist. Let me know if you need more info.

Alex
562.682.2042 (m)

http://www.thelincolnforum.net/phpbb3/v ... 15&t=49375

Just had this question posed to me by a shop out in Florida. I think this would be the best place for the right answer. Would the dash and door panel inserts I am making for the 61-63 Lincoln Continentals get points taken off in a judging competition? I think burlwood and birdseye would probably get...

JDK, I did this once and have paid to do it 3x since then. It was a BITCH to do. Pressing the original bushings off and new ones on had to be the most challenging I think. Getting the coils out was also a bear but not too bad. I would shop around until you find something
you're comfortable paying

Door panel and dash wood grain inserts.

http://www.thelincolnforum.net/phpbb3/v ... 15&t=49434

Solid, if you still need a rear glass I have a few out of cars and ready to ship. LMK

I have front and rear gaskets too.

Hydroboost conversion kit in for sale section in case its a consideration.

http://www.thelincolnforum.net/phpbb3/v ... 15&t=49375