Accelerator (gas) pedal
Moderator: Dan Szwarc
-
- Occasional Visitor
- Posts: 32
- Joined: Fri Mar 15, 2024 10:11 pm
- Contact:
Accelerator (gas) pedal
Hello yall. I am wondering if anyone has a solition for a replacement accelerator pedal? Mine seems cracked near the bottom and I’m not sure if anyone has found maybe a ford reproduction one that can work (some look similar at first glance?) or if anyone has a good used unit. Thanks!
The “7 liter beater”
1964 Lincoln continental sedan
Black on Black
1964 Lincoln continental sedan
Black on Black
-
- Addicted to Lincolns
- Posts: 2070
- Joined: Wed Apr 29, 2009 1:57 pm
- Location: St. George. Maine
- Contact:
Re: Accelerator (gas) pedal
You're in the South. Try Dennis Carpenter. That gas pedal has got to be a Ford thing. He makes them, and it is worth the trip to his factory to have a tour. When I was there, there was a fellow operating a machine and he said he was making stern wills. I'm from Maine and the language gap was wide. I have a son in law who is a lobsterman, and even I know what a stern is. But I didn't know what a stern will was and made a note to ask John Quincy when I got back. But out of the other side of the machine, steering wheels were coming out! Live and learn! Wayne
-
- Addicted to Lincolns
- Posts: 1364
- Joined: Sun Oct 16, 2016 2:09 pm
- Location: North Battleford, Saskatchewan
- Contact:
Re: Accelerator (gas) pedal
The Lincoln pedal is unlike anything I have seen in full size cars or trucks, but Mustang and T Bird use a similar boot underneath, so may be similar. If you can't find a repop, I have some useable 60 year old originals, but the tread ribs will be lifting.
Fraser Noble, Western Canada
'62 and '67 LCC.
'62 and '67 LCC.
-
- Occasional Visitor
- Posts: 32
- Joined: Fri Mar 15, 2024 10:11 pm
- Contact:
Re: Accelerator (gas) pedal
Okay, so update. I pulled the pedal after work to examine a bit closer, had an old ford number on the back.
C2VA-9735-A-1
The number really does not have an exact match according to old google, but a very similar model comes up - for a few years of the fairline and the t-bird. Although that unit doesn’t seem to have the two studs that mount the linkage in the back (like mine does).
I called the people at Dennis carpenter but to no avail, the nice customer service yep that answered explained that they don’t have a listing for any Lincoln stuff and although similar they can’t recommend for a customer to try due to liability (if one gets a stuck throttle and crashes into the front of a strip mall) so no luck there.
May have to end up just fabricating one myself ?
C2VA-9735-A-1
The number really does not have an exact match according to old google, but a very similar model comes up - for a few years of the fairline and the t-bird. Although that unit doesn’t seem to have the two studs that mount the linkage in the back (like mine does).
I called the people at Dennis carpenter but to no avail, the nice customer service yep that answered explained that they don’t have a listing for any Lincoln stuff and although similar they can’t recommend for a customer to try due to liability (if one gets a stuck throttle and crashes into the front of a strip mall) so no luck there.
May have to end up just fabricating one myself ?
The “7 liter beater”
1964 Lincoln continental sedan
Black on Black
1964 Lincoln continental sedan
Black on Black
- Dan Szwarc
- Site Admin
- Posts: 29890
- Joined: Fri Jun 16, 2000 1:01 am
- Contact:
Re: Accelerator (gas) pedal
Fuck those assholes worried about “liability”.
Try this pedal: https://www.ecklers.com/1965-1966-ford- ... 843-1.html
Take a chance FFS.
Try this pedal: https://www.ecklers.com/1965-1966-ford- ... 843-1.html
Take a chance FFS.
The below links are mostly dead.
Dan Szwarc: 1966 Convertible
Shop Manual or MPCs available
Signature rules.
Help the forum for 2024.
Dan Szwarc: 1966 Convertible
Shop Manual or MPCs available
Signature rules.
Help the forum for 2024.
-
- Addicted to Lincolns
- Posts: 2070
- Joined: Wed Apr 29, 2009 1:57 pm
- Location: St. George. Maine
- Contact:
Re: Accelerator (gas) pedal
I say stick liability where the sun doesn't shine. If you think those parts from D Carpenter will fit, get 'em and put 'em on. I can't imagine that they cost that much. And you can always sell them to some Ford group that will use them to replace the bare foot pedals that once seemed so popular...or try Dan's link, who knows? Wayne
- LithiumCobalt
- Lincoln-ally Insane
- Posts: 3867
- Joined: Wed Feb 16, 2011 4:16 pm
- Location: Knoxville, TN
- Contact:
Re: Accelerator (gas) pedal
Why not buy good used from a parts car? Bound to be many out there available. Polish up the frame and replace the ribbing to make it like new.
Nick
Current: 1971 Mark III, 2012 MKZ AWD, 2016 F-150 Platinum
WANTED: 1969 Continental sedan, 77 Continental Town Car w/opera window delete, 76 Fleetwood Brougham
Current: 1971 Mark III, 2012 MKZ AWD, 2016 F-150 Platinum
WANTED: 1969 Continental sedan, 77 Continental Town Car w/opera window delete, 76 Fleetwood Brougham
-
- Occasional Visitor
- Posts: 32
- Joined: Fri Mar 15, 2024 10:11 pm
- Contact:
Re: Accelerator (gas) pedal
It’s not so much the ribbing but the way they molded the vulkinzed rubber at the base around the hinge area. Mines all cracked and I would think any 55+ year old parts car would likely be the same? But maybe not. I was probably going to try one of those ford repo ones but I’ll have to make some type of modification to the linkage mounting as I haven’t found one with little machine screw studs sticking out the back. The re-pop ones are real cheap so if it dosent work out I’m only out like $20 bucks
The “7 liter beater”
1964 Lincoln continental sedan
Black on Black
1964 Lincoln continental sedan
Black on Black
-
- Occasional Visitor
- Posts: 32
- Joined: Fri Mar 15, 2024 10:11 pm
- Contact:
Re: Accelerator (gas) pedal
Update - I found somthing that looks mighty close (at least the mounting bits look close) listed for a 1970 and up ford “L” series (truck?) so I ordered and hopefully can make that work. It has the same mounting and same two machine studs sticking out the back. I’ll update adding when it arrives and I match to the orig unit-
The “7 liter beater”
1964 Lincoln continental sedan
Black on Black
1964 Lincoln continental sedan
Black on Black
-
- Addicted to Lincolns
- Posts: 1364
- Joined: Sun Oct 16, 2016 2:09 pm
- Location: North Battleford, Saskatchewan
- Contact:
Re: Accelerator (gas) pedal
Interesting. The L series (Louisville) trucks were Fords newest highway haulers at that time, the high cab, compared to the engine, makes sense for an underside pivot linkage like that. It also makes sense to re-use that part when designing it. I hope you will post pictures of both, when you receive it.
Fraser Noble, Western Canada
'62 and '67 LCC.
'62 and '67 LCC.
-
- Occasional Visitor
- Posts: 32
- Joined: Fri Mar 15, 2024 10:11 pm
- Contact:
Re: Accelerator (gas) pedal
I sure will! Possibly Wednesday or Thursday for new pedal delievery. The pedal for the thunderbird that Dan suggested is probably the closest match to the original, the main difference being the way the linkage mounts on the backside.
The “7 liter beater”
1964 Lincoln continental sedan
Black on Black
1964 Lincoln continental sedan
Black on Black
- linc64
- TLFer for Life
- Posts: 6218
- Joined: Tue Oct 19, 2004 1:01 am
- Location: Costa Mesa, Ca.
- Contact:
Re: Accelerator (gas) pedal
I seem to remember Todd Allen having a way to restore the pedal.
Jim Ayres
Western Region Director
Photobucket link blocked by PB
Join the LCOC
Join the Lincoln Motorcar Foundation
Western Region Director
Photobucket link blocked by PB
Join the LCOC
Join the Lincoln Motorcar Foundation
- Dan Szwarc
- Site Admin
- Posts: 29890
- Joined: Fri Jun 16, 2000 1:01 am
- Contact:
Re: Accelerator (gas) pedal
Parts cars are disappearing and being scrapped. They might be out there in the south and out west, but not in rust-belt states anymore.LithiumCobalt wrote: ↑Mon Apr 29, 2024 10:41 pm Why not buy good used from a parts car? Bound to be many out there available. Polish up the frame and replace the ribbing to make it like new.
The below links are mostly dead.
Dan Szwarc: 1966 Convertible
Shop Manual or MPCs available
Signature rules.
Help the forum for 2024.
Dan Szwarc: 1966 Convertible
Shop Manual or MPCs available
Signature rules.
Help the forum for 2024.
- LithiumCobalt
- Lincoln-ally Insane
- Posts: 3867
- Joined: Wed Feb 16, 2011 4:16 pm
- Location: Knoxville, TN
- Contact:
Re: Accelerator (gas) pedal
Of all the Lincoln specialists out there, there must be one somewhere.
Nick
Current: 1971 Mark III, 2012 MKZ AWD, 2016 F-150 Platinum
WANTED: 1969 Continental sedan, 77 Continental Town Car w/opera window delete, 76 Fleetwood Brougham
Current: 1971 Mark III, 2012 MKZ AWD, 2016 F-150 Platinum
WANTED: 1969 Continental sedan, 77 Continental Town Car w/opera window delete, 76 Fleetwood Brougham
-
- Addicted to Lincolns
- Posts: 1364
- Joined: Sun Oct 16, 2016 2:09 pm
- Location: North Battleford, Saskatchewan
- Contact:
Re: Accelerator (gas) pedal
I have at least four old ones, but the treads (ribs) are tatty looking, if the OP has found something that looks decent and works, that would be great for all the fussy people out there. Louisville trucks were built until '98, so their parts may be easier to find.
Fraser Noble, Western Canada
'62 and '67 LCC.
'62 and '67 LCC.
Who is online
Users browsing this forum: No registered users and 1 guest